FIRST COAT FLOOR SEALER
|
Product Information |
First Coat quickly establishes the base coat for subsequent
applications of Paragon's Sun-Rise Plus.
Two coats of First Coat are equivalent to four coats of floor finish thus
a substantial savings in material, time and labor are realized. It
sets up the ideal surface to begin utilizing the Paragon System techniques
to maximum advantage. It produces a mirrorlike gloss that is trapped
below the Paragon Sun-Rise Plus Coating and
is not affected by surface blemishes. The optimum appearance is retained
during all types of heavy traffic, until the surface finish can be restored
or rejuvenated using Paragon's Refine. |
Benefits
Restores Color and Seals Pores
Improves Bonding of Final Coats
Part of the Paragon Floor Care System |
Specifications
|
Appearance |
Milky Liquid |
| Odor |
Characteristic |
| Specific Gravity |
1.020±0.005 |
| Density |
8.51±0.05 lb./gal |
| pH |
8.5±0.5 |
| Boiling Point |
Near 212ºF |
| Type |
Pure acrylic |
| Non-Volatile Content |
16.5%±0.5% |
|
|
- Vinyl
- Vinyl Asbestos
- Asphalt
- Concrete
- Flagstone
|
- Brick
- Terrazzo
- Marble
- Quarry Tile
- Linoleum
|
|
How
to Use
- Remove previously used floor coatings and insure floor is free from
dirt, soap scum, etc. For easiest removal of previous coatings
use Paragon's Magic Mop. Rinse
thoroughly and allow to dry
- Apply two coats of First Coat allowing 30 minutes drying time between
coats and before the first application of Sun-Rise
Plus.
- Allow 30 minutes drying time before applying the second coating.
Paragon Supply Company
7019 West Chester Pike
Upper Darby, PA 19082-1705
(800) 426-3934
(610) 352-4848
FAX: (610) 352-9211 |
|
Feel free to email your
questions to the expert staff at Paragon Supply Company |
