Sun-Rise Plus Floor Finish
|
Product Information |
Sun-Rise Plus is designed to hold up under the extreme foot
traffic, pallet jacks, carts and heavy soil conditions found in Super Markets,
Shopping Malls, Stores, Schools, Health Care Facilities, etc. It combines
unequaled durability with unbelievable gloss retention and mark resistance. |
Benefits
High Solids
"Wet Look"
Easy to Apply
Resists Scratching
and Black Marks
Easy to Maintain
with any Speed Machine
Part of the
Paragon Floor Care System
|
Specifications
|
Specific Gravity |
1.020±0.005 |
| Appearance |
Milky Liquid |
| Odor |
Characteristic |
| Water Solubility |
Emulsifiable |
| pH |
8.5±0.5 |
| Density |
8.35±0.05 lb./gal |
| Boiling Point |
Near 212ºF |
| Flash Point |
None to boiling |
| Stability |
Stable |
|
|
- Vinyl
- Vinyl Asbestos
- Asphalt
- Concrete
- Flagstone
|
- Brick
- Terrazzo
- Marble
- Quarry Tile
- Linoleum
|
Paragon Supply Company
7019 West Chester Pike
Upper Darby, PA 19082-1705
(800) 426-3934
(610) 352-4848
FAX: (610) 352-9211
|
How
to Use
- Prepare the Floor utilizing Magic Mop to completely remove all previously
used floor coating and sealer.
- Apply two coats of First Coat to establish a base for Sun-Rise Plus.
- Apply one to three coats of Sun-Rise Plus. Allow at least 30
minutes between coats.
- Buffing is not needed to improve the gloss or harden the finish, or
to improve the wearing characteristics. This glossy base can later
be enhanced to a wet look luster by utilizing the Paragon All Speed
technique.
- Clean daily by dust mopping or damp mopping with Paragon Nu-Tro No-Film
All Purpose Cleaner/Detergent.
|
|
Feel free to email your questions to
the expert staff at Paragon Supply Company
|
